- Earloop Welding Ultrasonic Face Mask Making Machine With Intelligent Computer
Product features
1. Automatically.
2. Advanced ultrasonic welding technology:
3. Stable performance and low failure rate
4. Low noise and small floor area
5. Aluminum alloy structure, no rust, long service life
Equipment characteristics
- The machine adopts aluminum alloy structure, small size, stable operation and low scrap rate;
- With photoelectric detection, automatic counting, can control the production speed and high output;
- It can produce about 100 pieces per minute, and can produce (3-6 layers) multi-layer masks.
- You can adjust the size of the mask blank and the folding location.
- The whole line include face mask blank making machine and outside earloop welding machine
Equipment Features
- Automatic tension control of raw materials to ensure the balance of tension of raw materials;
- Photoelectric detection of raw materials to reduce the waste of materials, plus voice-activated alarm and stop;
- The equipment is enabled total quantity counting and single-stack counting, which is convenient for the post-process connecting to the sterilization packing line;
- Modular/humanized design for easy maintenance;
- The whole machine is made of aluminum alloy, sheet metal and chrome-plated steel. It is good-looking, durable and anti-rust, causing no pollute to the environment.
- Full servo action is adopted in the ear-loop welding to achieve energy-saving and high-speed;
- The entire production line requires two operators, one is responsible for the operation of the machine and the replacement of the raw material rolls; another is responsible for collecting the finished product mask and arranging the boxes in an orderly manner; the person supervising the machine can take care of multiple machines at the same time.
Raw materials for manufacturing face mask:
| 1 |
Two layers of PP non-woven composite fiber (about 30g). |
| 2 |
The middle layer is meltblown cloth (about 25g). |
| 3 |
Nose bridge strip PP3 mm. |
| 4 |
Earband is round with a diameter of 2.5-3mm.
|
Product parameters
| Model |
LR type |
| Maximum width of bag-making machine |
500mm |
| maximal length |
1200mm |
| Production speed |
180-200 piece/min |
| Main motor power |
1.1kw |
| Electric heating power |
2kw |
| Voltage |
220v/50hz |
| machine weight |
700kg |
| Dimension |
3600*1300*1700mm |
| The thickness of the apron |
0.01-0.08mm |
- Equipment installation and configuration requirements
- Equipment size: 4200mm (L) x 1100mm (W) x 2200mm (H);
- Equipment weight: 1600 KG
- Working voltage: AC220V, 50 / 60HZ, rated power: 4KW
- Compressed air: 0.5-0.7Mpa
- Use environment: temperature 10-35 ℃, humidity 5-35% HR, no flammability, corrosive gas, no dust (cleanness not less than 100,000)
